Rose Jointed Drop Links ?

Discussion in 'Classifieds (old)' started by TrackM3, Nov 21, 2007.

  1. TrackM3

    TrackM3 Member

    I am going to order some more drop links for the new car in the next few weeks, the ones i get are as below.
    3/8 teflon race rod ends with Studs left and right hand threads so easy to adjust on the car, aluminium bar in most lengths, for 2 comes out at around £50 pair, if anyone is interested please let me know Bar lengths ?


    [​IMG]
     
  2. f1bmw

    f1bmw Member

    I am interested! Excuse my ignorance but these are for the front roll bar i pressume,i have to fit a whiteline one on the car yet so i would probably replace these if there what i think they are!
     
  3. TrackM3

    TrackM3 Member

    These can bo for the front or rear ARB, just need a total length of your old drop link ?
     
  4. f1bmw

    f1bmw Member

    Dont need them for the rear just the front standard length will be fine if there adjustable i would think ....
     
  5. TrackM3

    TrackM3 Member

    if you can measure yours would be good, i think they are 8 or 9'' ctr-ctr ?
     
  6. DawieM3

    DawieM3 Member

    Hello Martin,

    I would be in for a set for the E30 M3, front and rear. I will measure over the weekend and let you know.

    How is the car coming on, will you be ready for the 6th December ?


    Regards,


    Dave
     
  7. TrackM3

    TrackM3 Member

    Dave, let me i will have the fronts available in a week, rears i can get also just let me know the total lengths

    car goes into Matt @ ETA Motorsport hopefully late december early jan 08,

    see you on the 6th
     
  8. DawieM3

    DawieM3 Member

    Thanks Martin,

    Will climb under the car tomorrow and let you know.

    Regards,

    Dave
     
  9. DawieM3

    DawieM3 Member

    Hello Martin,

    My fronts measured at 245mm C-C standard , so some adjustment either side of this will be good, if I change to adjustable ARBs at a later stage.

    My rears measured 100mm C-C standard, same again with the adjustment.

    Regards,

    Dave
     
  10. TrackM3

    TrackM3 Member

    Dave
    i will try and get the rears for Brands, fronts will be here by then so will bring them along.
     
  11. DawieM3

    DawieM3 Member

    Cheers Martin.