Top oil pan baffles

Discussion in 'Classifieds (old)' started by John, Jun 2, 2007.

  1. John

    John 2.7l S14 Forum Supporter

    UPDATE:

    Sorry for the delay guys, the machine shop tells me I can pick
    up the parts next week. I will ship everything out then ASAP.

    John
     
  2. John

    John 2.7l S14 Forum Supporter

    plus: Adwo and his extra parts


    All of these orders are packed up and are shipping tomorrow morning
    8:00 a.m. German time. This ended up turning into a 4 week delay, thanks for
    being patient.

    PS: I have 5 oilpan baffles extra in stock right now, if interested in one
    please contact me via email.

    John
     
  3. petesm3

    petesm3 Member

    Received today, Thanks
     
  4. Gregg

    Gregg Member

    Received mine last week. Thanks!

    Gregg
     
  5. John

    John 2.7l S14 Forum Supporter

    great to hear that.

    I have 5 oilpan baffles left in stock if anyone is interested.

    John
     
  6. Wld_tony

    Wld_tony Member

    Has anyone here had the same problem ive been having trying to get the legs welded in for the horizontal baffle, there saying they wont weld cast aluminum,i went to four different places, So is it really needed, mine being held with the two hex bolts on the vertical baffle stays in pretty stiff, I still have the legs inplace but not welded in, so the play is like 1mm up or down.
    any comments on this
     
  7. John

    John 2.7l S14 Forum Supporter

    you can also drill holes thru the pan and bolt it in (use sealing washers to that it doesnt leak). but it should not be a problem to weld the alum pan, we weld them over here. find a good welding shop that can weld aluminum.

    John
     
  8. arjanvanessen

    arjanvanessen Member

    can someone tell me the partnumber of this oilpan ?? , is it 11131311391 ??
    Arjan
     
  9. Elcortez

    Elcortez Member

    Hi' Arjan.

    This oilpan:
    [​IMG]

    Has the partnumber: 11131311391

    Remember it gets supplied without the baffeling.
     
  10. empty

    empty Member

    Steffen, do you know the cost for that?

    Thanks,
    Mike
     
  11. mortimer

    mortimer New Member

    Motorsport price list 11/2003:

    898€
     
  12. masa

    masa Member

    Prices has gone little upper in few years.

    Price 3/2008: 1611€

    Matti
     
  13. Kiko

    Kiko Active Member

    I'm about to fit John's horizontal baffle. The package came with a small hedge, I searched for but couldn't see the use of it, what's it for?
     
  14. John

    John 2.7l S14 Forum Supporter

    the small piece is to mount on top of the stock vertical baffle (if you have it) using the short spacers supplied. it goes between the stock vertical baffle and the horizontal baffle. if you have a taller aftermarket vertical baffle, then you dont need to use it.

    John
     
  15. 87 m3

    87 m3 Member

    Hi John - do you have a feel for the best set-up ; the stock horizontal baffle with your vertical baffle or the extended horizontal baffle?
     

    Attached Files:

  16. John

    John 2.7l S14 Forum Supporter

    It doesnt matter. If you have an aftermarket taller vertical baffle, you can make the horizontal baffle work. If you still have a stock vertical baffle, then you add the small vertical piece and the 2 short spacers supplied. In both instances, the horizontal baffle sits up higher (as intended).

    If your aftermarket vertical baffle is TOO tall, then you should trim it down by a small amount so that the horizontal baffle doesnt sit too high. (any shop can do this).

    John